09-07-2009, 10:13 AM | #1 |
Junior Member
Join Date: Sep 2009
Posts: 1
|
VDSManager multiple public IPs
Hi,
As I did not like the fact that our users could interfere with vdsmgr public IP, I installed VDSManager that way : I have 2 NICs with 2 public IP addresses : eth0 : 210.XX.XX.1 (licensed VDSManager) eth1 : 220.XX.XX.1-254 (for the CTs public IPs). I managed to do some source routing using : ip rule add from 220.XX.XX.0/24 table 6 ip route add default dev eth1 via 220.XX.XX.254 src 220.XX.XX.2 table 6 It works ok, but I have a few problems. After a while, the routing crashes. Also, CTs are not pingable from the 220.XX.XX.0/24 network. Is there a way to enhance that, or am I doing something wrong ? Is it safe to leave the node IP on the same range as the VMs ? Thanks for your answers, |
|
|